The S5+ Line Extender consisting of unit 1 and unit 2 was developed to extend the limited transmission range of UPN and UP0 interfaces. One pair at least is necessary to achieve a line extension.
In case of different cable types and parameters a chain of S5+ systems can be built to bridge bigger distances. Each S5+ in the chain must be placed at the junction point of each section of the cable type or diameter.
For extensions over 10 km up to 6 units / 3 pairs can be cascaded. Each pair of S5+ bridges a distance of approx. 10 km. Thus an extension up to 30 km can be achieved.
Please view our flyer for further information.
| Order No. | Unit | Item Name |
|---|---|---|
| 1F5211M | Box 1 | NovaTec S5+ incl. 1x Up0 Slave / 1x U0 Master (19″ chassis) |
| 1F5210S | Box 2 | NovaTec S5+ incl. 1x Up0 Master / 1x U0 Slave (table chassis) |
Technical specification of Line Extender
| Mechanical Data | |
| length x width x height | 19″ Chassis: 480 x 220 x 60 mm (1,5 RU) Wall-mounted chassis: 365 x 220 x 60 mm |
| weight (unit without packaging and auxiliaries) | 3,5 kg for 1F5211M & 3,7 kg for 1F5210S |
| Electrical Data | |
| Power Supply End User Side: | 100-240 Volts AC (Use the appropriate country local power cord with IEC320 connector on one end). |
| Power Supply PABX Side: | 48 Volts DC (Use the original supplied power cord only!) |
| Power Input: | 1F5211M : 48-70 V DC / 0,3 A 1F5210S : 100-240 V AC / 50-60 Hz / 42-56 VA |
| Protection Earth: | Separately via earth cable with a cross section of min. 2.5 mm2 (note the instructions on the label on the back side of the unit). This cable is not included in the delivery package. |
| Internal overvoltage protection | secondary protection available |
| Available Interfaces | |
| 1 x UP0 Interface (not powered): | Maximum loop resistance: 160R* |
| 1 x U0 (2B1Q) interface (not powered): | Maximum loop resistance: 800R* |
| Environmental Specifications |
|
| Storage and Transport: | -20° C up to +90° C 0% up to 95% relative humidity (not condensing) |
| Operation | -5°C up to +60°C for 1F5210S-xx and 0°C up to +60°C for 1F5211M-xx 0% up to 95% relative humidity (not condensing) |
*: only one type and homogenous cable.
